‘Max ion’ cyb, atb salt tek. 50 mhrb. Combined pulls (6 total, per instructions)
.22 micron filter, Re x, evap crystal
Growing DMT Crystals
To grow larger DMT crystals, the process comes down to optimizing the crystallization phase of extraction, which relies heavily on patience, temperature control, and solvent choi... View MoreGrowing DMT Crystals
To grow larger DMT crystals, the process comes down to optimizing the crystallization phase of extraction, which relies heavily on patience, temperature control, and solvent choice. Here’s a step-by-step outline that may help you achieve larger crystals:
1. Purity of the DMT Solution
Ensure that your extracted DMT is as pure as possible before attempting crystallization. Any impurities in the solution can disrupt the formation of large, clear crystals.
Recrystallization is a common technique used to purify DMT before attempting to grow larger crystals. In this process, DMT is dissolved in a solvent and filtered to remove impurities.
2. Choose the Right Solvent
Naphtha is often the solvent of choice for DMT extraction because it easily dissolves DMT at warm temperatures but precipitates it as it cools down.
Other solvents like heptane or hexane may also be used and sometimes result in different crystal formations.
3. Slow Evaporation (Patience)
To grow larger crystals, slow evaporation of the solvent is crucial. When the solvent evaporates too quickly, the crystals will form but they will be small and less well-formed.
After dissolving your DMT in a warm solvent, allow the solvent to cool down slowly at room temperature. Place the jar in a spot where temperature changes are minimal to avoid sudden precipitation.
4. Freezer Method
Once the solution has cooled to room temperature, placing it in the freezer can encourage crystal growth. However, for larger crystals, you want to cool it slowly. Lower the freezer temperature gradually by placing the jar in the fridge first, then transferring it to the freezer.
Don’t rush the process; letting the crystals grow over several days or even a week can yield larger, more defined structures.
5. Minimize Disturbance
It’s important not to disturb the jar or the solution while the crystals are forming. Any movement can disrupt the growth process and lead to smaller or broken crystals.
6. Supersaturation
In some cases, letting the solvent become supersaturated can help encourage larger crystals to form. This means allowing more DMT to dissolve in the solvent than would typically be soluble at room temperature, often by heating the solvent, then slowly cooling it.
7. Seeding the Crystals (Optional)
You can introduce a small crystal (or “seed”) into the solution to act as a starting point for larger crystal growth. This gives the dissolved DMT a point to begin forming around, often leading to larger crystals.
8. Check Temperature Stability
Make sure that the temperature in your environment or freezer is stable. Fluctuations in temperature can lead to uneven crystal growth, often resulting in many small crystals instead of a few large ones.
9. Harvesting and Drying
When you see the large crystals forming, don’t rush the process of drying them out. After you carefully remove the solvent, allow the crystals to air dry slowly at room temperature.
Summary of Key Factors:
Purity: Ensure your DMT is clean and pure before crystallizing.
Slow Evaporation: Let the solvent evaporate slowly.
Cooling Gradually: Cool the solution slowly, from room temperature to the freezer.
Patience: Allow plenty of time for the crystals to grow undisturbed.
It’s an intricate balance of controlling environmental factors and maintaining patience, but with careful attention to detail, you can achieve larger, more beautiful DMT crystals.
Recrystallized MHRB. Roughly 2 grams pictured. Initial straight to base was pulled and recrystallized by super saturating 50 ml solvent heated with 3 grams dmt. Poured off solvent after these formed. ... View MoreRecrystallized MHRB. Roughly 2 grams pictured. Initial straight to base was pulled and recrystallized by super saturating 50 ml solvent heated with 3 grams dmt. Poured off solvent after these formed. Cold wash with solvent and dry. Before use one must crush crystal to allow residuals to escape from extraction I believe.
NN-DmT crystals (isolate)...
page=1&callback_module_id=groups&callback_item_id=52&year=&month=
View More
